Construction site inspection
Contents |
[edit] Introduction
Construction projects involve the co-ordination of a great number of people, materials and components. Regular inspection is a crucial part of ensuring that the works progress as intended, both in terms of quality and compliance. Inspections will be carried out for a number of different purposes throughout the duration of a project.
The inspection process is separate from the contractor's own supervision of the works. Inspection is carried out purely to give an independent view of the works either for the client or a third party, the term supervision might imply taking some responsibility for the works, when in fact contractual responsibility lies with the contractor.
[edit] Quality and progress
Inspection of the construction works will be carried out as they proceed to verify compliance with the requirements of the contract documents.
Site inspectors (or clerks of works) may be provided as an additional service by the existing consultant team, or could be new appointments. They may be based on site permanently or may make regular visits. On large projects it may be appropriate to have separate site inspectors for mechanical and electrical services, structural works and architectural works. Specialist inspections may also be necessary for specific aspects of the project such as; the client's environmental policy, site waste management plan, accessibility, and so on.
Site inspectors provide an independent assessment of the works and will generally report to the contract administrator. They are likely to keep a site diary, attend construction progress meetings and to produce regular written reports.
Traditionally on the larger projects a clerk of works was appointed to be the eyes and ears of the consultants and be resident on site. They had limited power other than to inspect; they could condemn work but any instructions would be issued by the architect or the contract administrator.
See Site inspector for more information.
Specific inspections may also be carried out during the construction phase as part of the general contract administration process:
- Condition surveys of neighbouring structures prior to commencement of the works.
- Regular valuation inspections to assess progress of the works in order to value interim payments.
- Inspecting mock ups and samples and witnessing tests.
- Witnessing commissioning.
- Inspection prior to certification of practical completion.
- Inspection after handover of the site to the client on certification of practical completion.
- Inspection at the end of the defects liability period to prepare a schedule of defects.
- Inspection on completion of the rectification of defects set out on the schedule of defects.
Design consultants generally have a responsibility to provide periodic inspection under the terms of their conditions of engagement. However, the fact that it is periodic, and inspection not supervision, can relieve them of liability for specific workmanship defects that result in court action.
See Snagging for more information.
NB The RIBA Plan of Work 2020 suggests that: 'Inspections should be undertaken by individuals with experience of similar construction technologies. If the design team remains with the client, its members are the most likely candidates to conduct these inspections. However, if the design team is novated to the contractor, a shadow design team may be appointed to monitor construction. In addition to ‘walking the site’ to inspect the ongoing works, those undertaking this role typically produce a monthly quality report to record issues identified and to monitor progress… The increasing use of digital surveying tools allows real-time comparisons of actual progress against planned progress, providing indisputable and granular information. On smaller projects, a more hands-on approach might be required with frequent site visits and immediate identification of areas where Construction Quality is not being achieved.'
[edit] Health and safety
Inspections are also necessary to ensure compliance with health and safety and CDM regulations. (Construction (Design and Management) Regulations). These can be internal inspections carried out by the contractor, third party audits or external inspections by the Health and Safety Executive.
The CDM regulations themselves only specifically mention inspection in relation to excavations, cofferdams and caissons (and any work equipment and materials which affect their safety), however, other health and safety inspections may be necessary in relation to:
- Prevention of falls and personal fall protection systems.
- Work at height.
- Work platforms such as scaffold and mobile platforms.
- Ladders and stepladders.
- Personal protection equipment, including head protection.
- Plant, vehicles and other equipment.
- Storage.
- Electrical systems.
- Asbestos risk.
- Provision of welfare facilities such as toilets and handwashing facilities.
- Site conditions and order.
- Avoidance of obstructions.
- Management of respiratory risks.
- Structural stability.
- Prevention of unauthorised access to the site.
It is important that inspection timing and frequency is properly organised, that proper reports are prepared and that action is taken if necessary.
Inspection reports might contain the following information:
- Details of the person making the report.
- Details of the person the inspection was carried out for.
- Location of the inspection.
- Date and time of the inspection.
- Description of the nature of the inspection.
- Details of health and safety risks identified.
- Details of any action taken.
- Details of any further action required.
[edit] Building control
Building control inspections are carried out to verify compliance with the building regulations. These can be carried out by a local authority building control inspector or by an approved inspector. Inspections may be required for:
- Excavations, before filling.
- Foundations before covering up.
- Damp proof course.
- New drains before covering up.
- Ground beams and steelwork.
- Insulation.
- Roof construction.
- Completion.
Advance notice must be given to arrange these inspections.
Very small projects can obtain building regulations approval purely by inspection. This is a building notice application rather than a full plans application.
For more information, see Building regulations inspection.
[edit] Other inspections
Other inspections might include:
- Planning inspections to verify compliance with planning permissions, conditions and obligations.
- Inspections by funding bodies for the release of money.
- Inspections by insurers.
- Highways Authority inspection and adoption of roads and sewers.
- Environmental Health Officer inspections related to pollution (mud, noise, smoke, water) and certain installations (such as drainage and kitchens).
- Fire Officer inspection of fire escapes, and for hazards, storage of certain materials and protection systems.
- Archaeological inspection of excavations.
- Factory inspectorate.
- Health and safety inspectors.
RICS Valuation – Global Standards, Effective from 31 January 2022, Published by the Royal Institution of Chartered Surveyors (RICS) in November 2021, defines inspection as: ‘A visit to a property or inspection of an asset, to examine it and obtain relevant information, in order to express a professional opinion of its value. However, physical examination of a non-real estate asset, for example, a work of art or an antique, would not be described as ‘inspection’ as such.’
NB: In a submission to the Inquiry into the Construction of Edinburgh Schools in 2016, The Royal Incorporation of Architects in Scotland (RIAS) criticised the transfer of responsibility from construction professionals to other parties less involved with the design process and sited the dilution of the role of the design team as one of the causes of poor quality construction. See Inquiry into the construction of Edinburgh schools view of the RIAS for more information.
[edit] Related articles on Designing Buildings
- Approved inspector.
- BREEAM Testing and inspecting building fabric.
- Building Control Performance Standard 6: Site inspection.
- Building regulations inspection.
- Construction quality.
- Defects.
- General foreman.
- Health and safety inspector.
- Inspection clause.
- Opening up works for inspection and testing.
- Quality control.
- Remedial work.
- Safety audit.
- Site inspector.
- Site meeting.
- Schedule of defects.
- Site foreman.
- Site safety.
- Site visit.
- Snagging.
- Statutory Compliance Inspection Checklist.
- Technical inspection.
[edit] External references
Featured articles and news
Quality Planning for Micro and Small to Medium Sized Enterprises
A CIOB Academy Technical Information sheet.
A briefing on fall protection systems for designers
A legal requirement and an ethical must.
CIOB Ireland launches manifesto for 2024 General Election
A vision for a sustainable, high-quality built environment that benefits all members of society.
Local leaders gain new powers to support local high streets
High Street Rental Auctions to be introduced from December.
Infrastructure sector posts second gain for October
With a boost for housebuilder and commercial developer contract awards.
Sustainable construction design teams survey
Shaping the Future of Sustainable Design: Your Voice Matters.
COP29; impacts of construction and updates
Amid criticism, open letters and calls for reform.
The properties of conservation rooflights
Things to consider when choosing the right product.
Adapting to meet changing needs.
London Build: A festival of construction
Co-located with the London Build Fire & Security Expo.
Tasked with locating groups of 10,000 homes with opportunity.
Delivering radical reform in the UK energy market
What are the benefits, barriers and underlying principles.
Information Management Initiative IMI
Building sector-transforming capabilities in emerging technologies.
Recent study of UK households reveals chilling home truths
Poor insulation, EPC knowledge and lack of understanding as to what retrofit might offer.
Embodied Carbon in the Built Environment
Overview, regulations, detail calculations and much more.
Why the construction sector must embrace workplace mental health support
Let’s talk; more importantly now, than ever.
Ensuring the trustworthiness of AI systems
A key growth area, including impacts for construction.
Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.
Traditionally on the larger projects a Clerk of Works was appointed to be the eyes and ears of the consultants and be resident on site. He had limited power other than to inspect. He could condemn work but any instructions would be issued by the Architect or the Contract Administrator.
Design consultants generally have a responsibility to provide periodic supervision included under the terms of their conditions of engagement. The fact it is periodic usually let's them off the hook for any liability for a specific workmanship defect that ends up in a court action.
Construction site inspection is a critical process in the construction industry that involves regular assessments of a construction site to ensure that work is being carried out according to approved plans, regulations, safety standards, and best practices. The purpose of construction site inspections is to identify and address potential issues, ensure compliance with codes and regulations, and maintain a safe and efficient work environment. Here are some key aspects of construction site inspection:
1. **Safety Compliance:** Ensuring the safety of workers, visitors, and the public is paramount. Inspectors assess whether proper safety measures are in place, such as protective equipment, signage, barricades, and fall protection systems.
2. **Quality Control:** Inspectors check the quality of materials and workmanship to ensure they meet specified standards. This includes verifying proper installation, alignment, and finishing of structural elements, systems, and finishes.
3. **Building Codes and Regulations:** Construction must adhere to local building codes, zoning ordinances, and other regulations. Inspections verify that the construction complies with these legal requirements.
4. **Permit Compliance:** Construction projects typically require various permits. Inspections confirm that work is being performed in accordance with the approved plans and permits.
5. **Structural Integrity:** Inspectors evaluate the stability and integrity of the building's structure, including foundations, walls, beams, columns, and load-bearing elements.
6. **Mechanical, Electrical, and Plumbing (MEP) Systems:** MEP systems must be properly installed and functional. Inspections cover electrical wiring, plumbing systems, HVAC installations, and fire protection systems.
7. **Site Conditions:** The site itself is inspected for proper excavation, grading, drainage, erosion control, and other site-related factors.
8. **Environmental Compliance:** Inspectors check for compliance with environmental regulations, such as waste disposal and hazardous materials handling.
9. **Documentation:** Inspections involve reviewing project documentation, such as plans, drawings, permits, and progress reports, to ensure accuracy and consistency.
10. **Progress Monitoring:** Regular inspections track the progress of the project and identify any delays or issues that might require adjustments.
11. **Communication:** Inspectors communicate findings to project managers, contractors, and relevant stakeholders. This helps address concerns promptly and make informed decisions.
12. **Quality Assurance/Quality Control (QA/QC):** Inspections contribute to the overall QA/QC process by identifying deficiencies that need to be corrected before they escalate.
13. **Post-Construction Inspections:** After construction, final inspections are conducted to confirm that the building is safe for occupancy and that all systems are functioning as intended.
Construction site inspections contribute to the successful completion of projects by ensuring that work is done to a high standard, in compliance with regulations, and with the safety of all parties in mind. They play a pivotal role in minimizing risks, avoiding costly rework, and creating a safe and efficient construction environment.